Installing a wheel bearing in a dump truck

6 034
Installing a new front wheel bearing in a 1987 Ford F800 dump truck.
Runtime: 18:26


bcherbs - 10 dager siden
So many dangerous moves. Be safe man.
wloshaw - 10 dager siden
Please use jack stands or appropriate blocking never trust just the jack.👍
Hayden Davis
Hayden Davis - 12 dager siden
Andrew why did you not pack the bearings with grease before you put them in?
Bobcat7569 Xbox360
Bobcat7569 Xbox360 - 16 dager siden
im surprised it ain't oil hubs on the front end of your truck Andrew
William Malenfant
William Malenfant - 17 dager siden
Andy. You need to learn the proper way of using wrenches. The adjustable wrench you were using it backwards.
Andrew Camarata
Andrew Camarata - 17 dager siden
They are designed to be used both directions.
Seán O'Nilbud
Seán O'Nilbud - 17 dager siden
Wowo 1987 it's like something from the 60's
Kristy Staats
Kristy Staats - 20 dager siden
Your not greasing the bearings right
J. A.
J. A. - 21 dag siden
Ay work with this Dayton wheels they change bearing when brakes are done
Noah Johnson
Noah Johnson - Måned siden
Did somebody bid on your eBay item at 0:40?
Alexis DeVille
Alexis DeVille - Måned siden
You really a should hand or use a cone pack that outer bearing not just pump grease in it!
Jason Laughrey
Jason Laughrey - Måned siden
Should have put make s gasket over the bearing cover plate. Other then that nice 👌.
Ty_Braek - Måned siden
14:48 is that I hole in the back of the tire??
Ty_Braek - Måned siden
I always wonder what non-mechanically inclined people think about when they drive. I’m always listening to everything and feeling the road and my truck. There’s people out there driving with squealing belts, bearings, lights out, banging, knocking, smoking, flat tires, and don’t even notice it. It blows my mind how people don’t notice that.
make mugen
make mugen - Måned siden
Nice maintenance job... Was the green house on the left the one where you fixed the lawn?... at end of the video... it looking very good...
1944chevytruck - Måned siden
thanks 4 video. be kind.
edwin tapia
edwin tapia - Måned siden
i think its time to change the front brakes
Rednecken Illinois
Rednecken Illinois - Måned siden
Wish it was this simple for my 88 Dodge Ram
parteibonza - Måned siden
I was sitting here with andrew's videos on autoplay, when this one started I said to myself at 0:05 JESUS that thing sounds like a dump truck!!!
Then I looked up at the video
OH! 🤣🤣🤣
Apparently these jerks didnt like my misuse of the lord's name. Sorry to stimulate your arrogance and smugness!
Dan Koning
Dan Koning - 10 dager siden
@parteibonza // 3 1/2 lines is too long? [hmm]; btw: I care about ppl, love the Lord, and not trolling if replying. IF you didn't read it, you'll wish you had one day. God bless.
parteibonza - 10 dager siden
@Dan Koning Too long. didn't're a jerk. Keep on trolling...stay healthy.... best
Dan Koning
Dan Koning - 10 dager siden
@parteibonza // There's no need to say a thing to ppl about voting. That decision has already been made, and I'm not worried in the least beit trouble or trial. "Every person is to be in subjection *to governing authorities.* For there is no authority *except from God,* and those which exist *are established by God"* [Rom 13 v1]. Maybe you should think about what your life will be like when everyone like me is gone, and all that's left are those w/o any morals who'll do what they want, when they want, to whom they want; that days coming for ppl w/o Jesus whether you believe it or not. *The Gospel of Jesus Christ:* -
parteibonza - 10 dager siden
@Dan Koning yer christian ass better be voting and encouraging other christians to vote instead of sitting on yer ass trolling youtube. of THAT I'm sure.
Dan Koning
Dan Koning - 10 dager siden
Poor use of the Lords name.
Raymond Ray
Raymond Ray - Måned siden
Wd40 and a match always works
scowell - Måned siden
I'd a washed that old bearing with some gasoline and blown it out before re-using it... that hole was why your bearing gave out, of course. Probably with that light of a grease you didn't have to pack the bearings... more like oil, as you said. Good job, great video.
Ben Gaudreault
Ben Gaudreault - Måned siden
Its his truck he can change parts however he wants, yada yada grease this clean that safety this. Uhg whatever
none none
none none - 2 måneder siden
Looks good but you should have packed that bearing first and also completely cleaned the old bearing and re pack
Roger Weaver
Roger Weaver - 2 måneder siden
You should get one of these.
Richard Wallinger
Richard Wallinger - 2 måneder siden
hopefully you sealed the outer bearing cover plate . I missed that or maybe you used a gasket. good job .. the overtightened bearings probably made the bearings run hot and go bad. The brake job mechanic could be to blame for that .. LOL.
MrDavidelliottjr - 2 måneder siden
Good job brother.
Steve Meador
Steve Meador - 2 måneder siden
Andrew, this was recorded a year ago and by the comments below I assume you are now aware of the need for jack stands under any vehicle you raise up and I also assume you know of the need to pack the bearings before you install. Either you pack them by hand or you could invest in an air powered bearing packer. Enjoy your recordings!
Pierre Laplante
Pierre Laplante - 2 måneder siden
Install a safety leg never trust a hydrolic jack
Pierre Laplante
Pierre Laplante - 2 måneder siden
You have to torque it to 200 lbs after loose it 1 full turn and torque it to 50lbs after you loose 1/8 of a turn and install the cutter pin
Robert wood
Robert wood - 2 måneder siden
Pack your bearings bro
Wayne Ikola
Wayne Ikola - 2 måneder siden
Well, for perhaps the 1,000th time, another subscriber will advise you to use vehicle jacks if you value your life.
John Farr
John Farr - 2 måneder siden
King pins and bushings not ball joints. (:
john lockhart
john lockhart - 2 måneder siden
Yes I do think you should have packed the outer bearing also , love you video too!
Otto Carr
Otto Carr - 2 måneder siden
Listen to Ty Biledeau regarding packing wheel bearings. It is done by scraping the bearing across your grease filled palm forcing the grease all the way into the rollers until the grease comes out the other side. Do this all the way around the bearing. The bearings will lead much longer this way. Also the slack adjusters for the brake adjustment have a locking ring that must pop out to engage the adjustment nut to keep it from backing off. It is part of the truck inspection done by the D.O.T.
John Hargis
John Hargis - 2 måneder siden
Brody corrigan
Brody corrigan - 2 måneder siden
All the people hating on him doing the bearings wrong listen to him he sounds sick his nose is stuffed you can hear it
phil thoreson
phil thoreson - 2 måneder siden
Looks like the '81 F-600 W/ Detroit diesel we had @ work
DodgeCity111 - 2 måneder siden
By "some people" are you refering to the female of the species?
Peter Jackson
Peter Jackson - 2 måneder siden
Some mechanic useing a shifting spinner back to front
Mme. Hyraelle
Mme. Hyraelle - 2 måneder siden
Hey for your hub caps, i know it's late but you could try hydro forming them if you have some times.
Mme. Hyraelle
Mme. Hyraelle - 2 måneder siden
*ebay sounds*
Jose carlos Grandinetti
Jose carlos Grandinetti - 2 måneder siden
Show 👏👏🇧🇷🐕🐕🐕🐕
Chris - 2 måneder siden
You don't know how to pack the bearing jack stands ..
Zach Dick
Zach Dick - 3 måneder siden
Suprised he doesn’t know how to pack a bearing full of grease. He’s amazing at doing everything else.
UnknownEvent - 3 måneder siden
i kinda like this truck man, it has attitude, and it looks like it can take a punch, the thing got character.
Milton Shaw
Milton Shaw - 3 måneder siden
Years ago I installed an oil lubricated bearing without packing it first. It failed in 12 miles, burnt up because oil was not getting out there that fast. Since then I have always packed them and have not had a failure in 50 years of any bearing I installed.
On your Bobcat 864 with loosing the signals from the joysticks and having to restart. On my T200 same problem but with foot controls. Just cycle the seat bar and punch the control start on the control panel. Works every time and is easier than having to restart the whole bobcat.
CLAYTON MOECHNIG - 3 måneder siden
That spindle nut being so tight Put a lot of load on that bearing which I’m guessing is why it blew the bearing I’m guessing someone had it off and way over tightened it and that puts a lot of stress into the bearings. Great content keep up the good work👍🏻
MsPrinceGT - 3 måneder siden
Just advice. The spanner(shifter) should pull in the direction of the turn, so the load doesn’t spread the moving jaw. Its upside down.
Evil Chickenfarm
Evil Chickenfarm - 3 måneder siden
Dayton wheels are dangerous. Take the lug nuts loose and hit with a hammer. Those cleats hurt when they hit you. Also get a grease needle to shoot grease through the bearing.
vernon husek
vernon husek - 3 måneder siden
My shop teacher 60 years ago told me to always put the top of a crescent wrench on top of the nut with the handle pushing down. That puts the strain on the solid part of the wrench and avoids wrench wear /breakage.
Jorgeeoeosoeoeosowlw Chacekeidoeieoeiel2o2lon
Shakdi Dagalimal
Shakdi Dagalimal - 3 måneder siden
2:39 I feel the crescent wrench nazis dander rising - will they explode in denouncement or bite their split tongues ?
Alex DeTrempe
Alex DeTrempe - 3 måneder siden
Can you explain why you didn’t pack the outer bearing by hand?
Alex DeTrempe
Alex DeTrempe - 3 måneder siden
Andrew Camarata thanks for the response you are hands down one of my favorite creators on NOburn keep up the good work
Andrew Camarata
Andrew Camarata - 3 måneder siden
Alex DeTrempe Because the grease I used was more like an oil, and it doesn’t require being packed in there like that
tycbec - 3 måneder siden
I learned not to work on a vehicle standing only on a jack, at least not without securing the vehicle more. At least throw in the loose wheel under some other low hardpoint under there. Serves two purposes: keeps you from going there and makes it easier to jack it up again. Large diameter wood is also good as extra safety. Andrew, you have plenty wood around, make yourself a couple of good stumps to have around in your garage! Great work on all your projects and videos! Keep them coming! Thanks!
walter fung
walter fung - 3 måneder siden
walter fung
walter fung - 3 måneder siden
@Andrew Camarata why didnt you pack the outside brg like the inside brg
Andrew Camarata
Andrew Camarata - 3 måneder siden
Oil grease, its fine.
jack sun
jack sun - 3 måneder siden
Andrew......please consider what it might feel like to have a squeeeeeeeshed foot.... at such a young age, or any age... I really think that it would suck... I use two jack stands and keep some weight on the floor jack too. always place the release of the jack stands on the opposite side from where you are working..... to avoid the accidental release of the jackstand... thank you.......P.S. I will trade you... you use jack stands and I will let the adds play through?? OK??
Lennox Caldwell
Lennox Caldwell - 3 måneder siden
tighten slack adjuster until it is tight then back off half a turn
ROVIT Tv - 4 måneder siden
Thanks for the video
Ronald Heit
Ronald Heit - 4 måneder siden
Kinda funny how he used his all sixtheenths wrench upside down but he still got 'er done.
He darn sure a hard working man self made man.
He saves himself some serious cash doing his own repairs on darn near every piece of equipment he owns.
Rodrigo - 4 måneder siden
I liked it, excellent work. this really cool truck. strong hug.
Brian OHara
Brian OHara - 4 måneder siden
I give you a A for effort though !!!
Brian OHara
Brian OHara - 4 måneder siden
You didn’t pack the outer bearing !!! Wtf . The most important step !!!
Sinjin Khan
Sinjin Khan - 4 måneder siden
Hey. I was just wondering. With all the diesel vehicles you have. Do you own your own tank? I know it may be a dumb question but i had to ask.You do more work being alone then any 4 people as a group. Have learned a lot. I learned how to weld in voc-tech. But that was 30 yrs ago. lol Thanks for the lessons. Love your Dogs. I enjoy your videos. Keep them coming. Be safe and healthy. Oh! Where are you located in NY? Upstate?
Woodman Outdoors
Woodman Outdoors - 4 måneder siden
Shocked you didn’t clean and repack the inner and pack the outter !
Capital Punishment
Capital Punishment - 4 måneder siden
If your outer races are countersunk like they where on my KLR's steering stem you can weld a bead on the inside so when it cools down it will fall straight out.
Ladders & Snakes
Ladders & Snakes - 4 måneder siden
GREAT content
M Starcevic
M Starcevic - 4 måneder siden
“Some people don’t know about vehicles” and he doesn’t pack the brand new bearing 😂😂
M Starcevic
M Starcevic - Måned siden
A Dude Wit A Rocket Launcher still better than not packing them at all
engineer gaming
engineer gaming - Måned siden
the grease is too oily to work for packing bearings
Scott Carson
Scott Carson - 4 måneder siden
looks like same parts see on a school bus
Gav La
Gav La - 4 måneder siden
Chrome sockets on an impact gun? Good video though
Andrew Camarata
Andrew Camarata - 4 måneder siden
I have had less chrome sockets break then black impact ones.
Squatch Hammer
Squatch Hammer - 4 måneder siden
Most of the time when I got any squeaking on my vehicle was either my brakes were jammed due to caliper failure or just got a rock in my brakes.
Saltiness_ Incoming
Saltiness_ Incoming - 4 måneder siden
Rule number one on bearings especially wheel bearings Never Miss Matched new to old number two always pack the bearings and grease first by hand or use a bearing packer you obviously have never been taught how to do this or read instructional manual I don't suspect your front bearings will last very long but you did have one thing right you pumped a ton of grease in there I would have pumped more but that was a sufficient amount in the middle and never reuse the old cotter pin they always break and fall out
Z k
Z k - 5 måneder siden
I think you should have packed these bearing.
ThatGuyCarmine - 5 måneder siden
Lots of YouTube mechanics here
lester petersen
lester petersen - 5 måneder siden
pllease get some kind of safe stand stuff happens real fast
DifferentialTim - 5 måneder siden
Yeah, love this channel and all his fixes. However, very least, flush that old bearing in petrol or cleaner and dry and feel and spin it just a bit to see everything is ok. then grease it and put it back into service. Never pack old grease with new grease as there can be hidden metal flakes, grit ect showing bearing is nearly about to fail and on a heavy truck! all that stress!.
Paul Reiche
Paul Reiche - 5 måneder siden
Someone PLEASE show Andrew how to pack a wheel bearing!
Mary Ellis
Mary Ellis - 5 måneder siden
Why does the brand new race for the inside look dirty compared to the nice clean one for the other side?
thomas ackerman
thomas ackerman - 5 måneder siden
Didn't see u adjust the other brake on the good side..
Autodidact2 - 5 måneder siden
At 0:41: It's the speed of the wheels, not "the speed of the tires [sic]", obviously!
AKVNEWS - 5 måneder siden
Never ever pound on a bearing race with a steel punch or any other steel tool..........Always use a piece of brass that is softer than the steel or you just might break off a fragment of the race and have it fly in your eye........I was in the garage business for years and still all my brass punches, etc. 3/4" brass diameter punch is good........use them everywhere. Brass is your friend when wanting to punch out races or any pressure fit part that is steel - I see you did the install with brass..........good job.
Stanisław K
Stanisław K - 5 måneder siden
9:32 Hey hey. Before you apply a new grease to an old dirty bearing, take and clean the bearing, flush it with oil, and then lubricate with new grease. The old dirt you left there could do a bad job.
J.R. In WV
J.R. In WV - 5 måneder siden
A good tip for adjusting S cam brakes that I always follow: tighten them as much as you can with a normal length 3/8 dr ratchet, then you back it off 1/4 turn in the rear and 1/2 turn in front. You never want your front brakes to hit first on a big truck.
Haskell Friedman
Haskell Friedman - 5 måneder siden
Is there suppose to be a rubber gasket under the cap to prevent water penetration? I saw you scrap away something under the cap which looked like an old gasket?
Mr.J.East! - 5 måneder siden
Milwaukee fuel impact gun way better than that kobalt.
Sheraz Qasim
Sheraz Qasim - 5 måneder siden
I dont have truck but i like your work..very easy & clean...
TRX Tech
TRX Tech - 5 måneder siden
3:09 I just watched another man bust a nut!
Eleazar Colin
Eleazar Colin - 5 måneder siden
You need new brakes
750jason - 5 måneder siden
To small of a jack no jackstand spindle looks bad 😳
Hagbard Celine
Hagbard Celine - 5 måneder siden
Dude, please take care of yourself. Use a jack stand and find a slab of concrete to work on.
Константин Бодров
I didn’t clean the nut! Lamer tool!
Bradley Wall
Bradley Wall - 5 måneder siden
"Going into Ford and asking for parts is worthless" No greater truth has been told on that day....
Ricardo Losada
Ricardo Losada - 5 måneder siden
They brakes????
Konstantin M
Konstantin M - 6 måneder siden
Hello, Andrew! I also repaired the car today. Russian and small car. Replacing both brake cylinders. The wheel bearing will also collapse soon.
tomek00026 - 6 måneder siden
ale fuszera, żal pare centów na drugie łożysko
Ronin - 6 måneder siden
why didn't you pack your bearing properly?
Andrew Camarata
Andrew Camarata - 6 måneder siden
Oil grease, its fine.
Peggyt1243 - 6 måneder siden
yikes .......1700 are there no speed limits?
Martin Matias
Martin Matias - 6 måneder siden
Great Infos. Cool
Bad Santa
Bad Santa - 6 måneder siden
I just come for all the EXPERTS in the comments section.
MN SHP - 6 måneder siden
i think that little hole in the cap is actually the source of the problem, as dust an dirt got in and destroyed the front bearing, its crazy how important seals are
brushrescue1701 - 6 måneder siden
😂😂😂🤣🤣🤣🤣🤦‍♂️ now that sounded like an eBay notification lol
Rad Ghorabi
Rad Ghorabi - 6 måneder siden
Man I love your energy, how you always find ways to keep the wheels rolling on your business, keep up the good work man, god bless